
Add to Cart
200kWH commercial battery system BESS to be used with diesel generator for rental
MODEL # | HES-45.60/400 | |||
POWER | Output (stand alone) | Standby Rating 30 min (kVA) @ 25°C 1 | 45 | |
Prime Rating (kW) @ 25°C / @ 45°C 1 | 36 | 27 | ||
Output (when external source available) | Maximum Load per Phase Before Generator Start Command (kW) 1, 2 | 10.2 (Immediate Start) 9 (5mins) | ||
Maximum Load (all phases) Before Generator Start Command (kW) 5 | 26.9 (2 hours) | |||
Combined System Output | Continuous Pass Through per phase (External Source Only) (A) | 100 | ||
Max Combined Output per phase (External Source + HES) (A)1 | 125 | |||
Max Power Assist (kVA)1 | 25 | |||
Input/Output | AC Input Voltage Range (V) | 400 (320 - 460) | ||
AC Output Voltage - 50 Hz (V) | 380 | |||
Input Connections | 125A 400V & 16A 230V CEE-Forms, 400V BusBar | |||
Output Connections | 125A 400V & 16A 230V CEE-Form & 400V BusBar | |||
Protection | Overload, Overheat, Short Circuit, Earth Fault | |||
STORAGE | Type | LFP (Lithium Iron Phosphate) | ||
Nominal Capacity @ 25°C (kWh) | 56.8 | |||
Charge Time (hours) @ 25°C 3 | 3 | |||
Maximum System Efficiency @ 25°C | 90% | |||
Battery Management System | Industrial Grade Intelligent Passive BMS Optimised for HES Applications | |||
Expected Cycle Life (To 80% Original Capacity) | 6,000 | |||
Maintenance Charge Cycle | ≤ 3 week | |||
CONTROL | Control Panel | ECM 7” Touch Screen Control Module | ||
Temperature Control | Analogue Voltage Controlled Forced Air Cooling | |||
Remote Generator Start | Dry Contact Relay | |||
Remote Communication | 3G/4G Dual SIM Modem/Router, Portal | |||
ENVIRONMENTAL | Water/Ingress Protection Rating | IP55 | ||
Operating Temperature Range (°C) 4 | -12 to +50 | |||
Sound Level (dBA) @ 0% / 100% Fan Speed | Acoustic Pressure @ 3m: 0 /66 | |||
MECHANICAL | Dimensions L x W x H (mm) | 1140 x 1450 x 1730 | ||
Weight (kg) | 1440 | |||
Lift Points | Forklift Pockets, Lift & Drag Skid, Lifting Ring |